This is a high performance Hand Held Metal Detector, designed to meet the exact requirement of the security industry or any area need to check metal objects.
e.g:
-- Body search for offensive weapons in crowd control, airport and border security.
-- Checking parcels and letters for metal objects and anywhere that hidden metal needs to be detected
-- Checking small hidden metal objects e.g woodworking..
Feature:
1) This metal detector operates on one 9 volt standard or rechangeable battery (Package not include).
2) To install the battery, slide off the battery cover and place the battery into its compartment while matching the +/- symbols.
3) Turn the detector on by pushing the on/off switch until it clicks on and the green LED is lit.
--The scanner detector is now operational.
Sensitivity Adjustment-- when performance instability is observed or sound is produced when detecting human body without any metal stuff, because the detection distance is loss than the stipulated requirement or the sensitivity is too high, it can be adjusted the sensitivity.
---> Insert a small straight-shaped screwdriver into the small hold of the handle of the detector and rotate clockwise barely to the position where no sound is produced, then rotate for next half a clrcle, until the sensitivity meets the requirement.
Package includes:
1 * Security Scanner Metal Detectors
1 * Belt Holster
1 * English user manual
Note:
1.Be sure to switch off the power after use the metal detector
2.Be taken out the battery when you won't use for a long time
3.Be sure to switch off the power when the battery is recharged
4.Charger voltage:9V for AC; 10V for DC.(not include the charger)
