Spec:
Item Type: Handheld Magnifying Glass
Material: ABS, Rubber, Acrylic Lenses
Size: Approx. 208 x 165mm / 8.2 x 6.5in
Handle Length: Approx. 15.5cm / 6.1in
Battery: 3 x AAA Batteries (Not include)
Multiplier: 5X
3 Light Source Gears: 32 LED cold light, 16 LED warm light, a total of 48 LED lights mixed light
Use: Printing, engraving, education, coins, stamps and weak eyesight reading, beauty, etc., can also be used as a light alone.
Operation Guide:
1. Hold the frame (B) with one hand, hold the handle with the other hand and rotate (D), adjust to the appropriate Angle, place the object to be observed in a fixed position, and then close the magnifying glass to one side of the object, and then move the magnifying glass slowly along the straight direction between the limit eye and the object until the object is clearly seen.
2. If the light source is insufficient, you can press the LED switch (C) to turn on the LED light source.
3. According to the use of the environment, can switch the LED light source, help to care eyesight.
Light source switching:
A. Press the light source switch to turn on the cold light LED. (Figure A)
B. Press the light source switch twice to turn on the warm LED. (Figure B)
C. Press the light source switch three times, turn on the cold and warm mixed light LED. (Figure C)
D. Press the light source switch four times to turn off the power switch.
To replace the battery:
1. Open the battery compartment cover (F).
2. Take out the old battery and load 3 new AAA batteries according to the label in the battery compartment.
3. Close the battery compartment cover.
(Note: Refer to the manual drawing)
Package List:
1 x Magnifying Glass1 x Lens Cloth1 x Manual
Item Type: Handheld Magnifying Glass
Material: ABS, Rubber, Acrylic Lenses
Size: Approx. 208 x 165mm / 8.2 x 6.5in
Handle Length: Approx. 15.5cm / 6.1in
Battery: 3 x AAA Batteries (Not include)
Multiplier: 5X
3 Light Source Gears: 32 LED cold light, 16 LED warm light, a total of 48 LED lights mixed light
Use: Printing, engraving, education, coins, stamps and weak eyesight reading, beauty, etc., can also be used as a light alone.
Operation Guide:
1. Hold the frame (B) with one hand, hold the handle with the other hand and rotate (D), adjust to the appropriate Angle, place the object to be observed in a fixed position, and then close the magnifying glass to one side of the object, and then move the magnifying glass slowly along the straight direction between the limit eye and the object until the object is clearly seen.
2. If the light source is insufficient, you can press the LED switch (C) to turn on the LED light source.
3. According to the use of the environment, can switch the LED light source, help to care eyesight.
Light source switching:
A. Press the light source switch to turn on the cold light LED. (Figure A)
B. Press the light source switch twice to turn on the warm LED. (Figure B)
C. Press the light source switch three times, turn on the cold and warm mixed light LED. (Figure C)
D. Press the light source switch four times to turn off the power switch.
To replace the battery:
1. Open the battery compartment cover (F).
2. Take out the old battery and load 3 new AAA batteries according to the label in the battery compartment.
3. Close the battery compartment cover.
(Note: Refer to the manual drawing)
Package List:
1 x Magnifying Glass1 x Lens Cloth1 x Manual
