Guitar Pedal Power Supply MIMIDI Effect Pedal Adapter 10 Isolated MP 02 Adapter Station DC Outputs for 9V 12V 18V Effect PedalBoard …

The MP-02 power supply will give guitarists clear and clean sound from effect pedals with the anti-ground noise and anti-interference treatment. This guitar power supply will play an important role on performance,musical concert,studio,etc.. The short circuit protection will assure the power supply function safely and stably. ?FUNCTIONS? DC 18V INPUT:Please plug in the output of power adapter, and use the exclusive matched adapter. If any extra adapters not produced by MIMIDI are used for this unit cause damages, user shall bear corresponding responsibility himself. OUTPUT 1-7: All DC 9V power output with the maximum volume of 100 mA, are suitable for ordinary analog effector. If output 1-7 might not be able to work properly, the connected digital effector are of larger power consumption, then you need to use output 8. OUTPUT 8: DC 9V power output with the maximum volume of 500mA, is suitable for digital effector and DC9V low-power digital guitar amplifiers. When instantaneous over-current occurs in this channel, the corresponding LED light would be flashing and the currents limit to 500mA. DC 12 OUTPUT:The maximum output current is 100mA.When instantaneous over-current occurs in this channel, the corresponding LED light would be flashing and the currents limit to 100mA. DC 18 OUTPUT: The maximum output current is 100mA. When instantaneous over-current occurs in this channel, the corresponding LED light would be flashing and the currents limit to 100mA. SWITCH FOR LED LIGHTS: All lights will be on if this power supply works normally. If you don't want all LED lights on, you can turn the switch back. The front panel of this unit has 10 high-brightness LED lights working as indicators, as well as lighting for Pedal Board. ?SHORT-CIRCUIT PROTECTION? All 10 outputs in this unit have separate short-circuit protection, i.e. shot circuit in one channel.