Great Stuff is even greater! Introducing the new patent-pending Great Stuff smart dispenser! The next generation of foam sealant dispensing is a game-changer: reusable for up to 30 days, It allows Great Stuff to be used again and again! It doesn't drip, eliminating mess;
Helpful Tips
- Shake vigorously for a minimum of 60 seconds. If the can sputters, simply shake the can while held upside down.
- Any uncured product that gets on the skin can be removed with acetone.
- Best results if used when product temperature ranges from 60-90°F (15-32°C). The can should not be exposed to temperatures more than 120°F. Cured foam should not be exposed to temperatures in excess of 240°F.
- Firmly screw straw assembly onto valve and dispense SLOWLY.
- Mist with water to speed cure.
- Trim cured foam with serrated blade.
- If applied outdoors, be sure to paint or cover foam to prevent discoloration and UV damage.
- Great Stuff cans featuring the straw tube applicator will seal shut if left to sit for more than 2 hours after its last use.
- If using GREAT STUFF SMART DISPENSER, follow these additional steps before application:
- Great Stuff cans featuring the Smart Dispenser may be reused up to 30 days with the straw left attached to the canister, just clean the tip after your first use.
- For best results:
- Thread the SMART DISPENSER onto the valve until it is secure, ensuring there is no gap between the dispenser and the valve.
- Do not unwind the dispenser after you have started using it.
- Let up on the trigger slowly to release pressure in the straw and prevent spurts during the next use and to achieve the most consistent bead.
