You can find more information forHow to Use the Uart LoRa Module with Arduino from: http://osoyoo.com/?p=18935
Notice: If you're not familiar with LoRa wirelessmodule, you'd better to buy two same frequency modules + antennas as you'll need two totransmit and receive data.
Description:
E32-915T20D is a 100mW wireless transceiver module, operates at 900~931MHz, based on original imported RFIC SX1276 fromSEMTECH. The module adopts LoRa spread-spectrum technology, which means the transmitting distance is much longer than before.
Widely used in various occasions: Meter Reading, Smart Home, Smart Agriculture, Smart Oil Field, Industrial Wireless Control, Environment Monitor, Temp/humidity Sensor and etc.
RF Parameter:
IC : SX1278
Working Frequency : 410~441MHz (Default: 433MHz)
TransmittingPower : 10~20dBm (Default: 20dBm?About 100mW?
Receiving Sensitivity:-130 dBm (Air Data Rate: 0.3kbps)
Air Data Rate:0.3k~19.2kbps (Default: 2.4kbps)
Test distance:3000 meter (In open and clear air, with maximum power, 5dBi antenna gain, height of 2m,Air Data Rate: 2.4kbps)
Hardware Parameter:
Size:21 * 36 mm (Without SMA)
Antenna Type:SMA-K
Communication Interface:UART (Baud rate: 1200~115200, default: 9600)
Buffer:512 bytes buffer (Automatically sub-packaging with 58 bytes per package)
Package Includes:
1 x LoRaUART Wireless Module(433 Mhz)
1 x LoRa SMA Antenna(433 Mhz)
