GORLARY Ceramic Backflow Incense Holder Waterfall Incense Burner Home Decor Backflow Incense Burner with 20PCS Backflow Incense Cones

Reasons for choice: The censer is made of advanced hand-made ceramic technology and raw materials, and professional ceramic craftsmen. The unique kiln changing technology and formula form the same texture of watercolor painting solidified on the censer.It is a back flow censer, but also a ceramic art, for your home to add artistic flavor. Package Contents: 1 incense burner, 1 bamboo clip, 20 incense cones Tips: It needs to be ignited in a windless environment. Ignite incense: please use the free clip to hold the incense cone. Do not use to extinguish the flame immediately after ignition. The burning time is about 4-6 seconds.After full combustion, put out the fire and place it in the reflow incense burner. Initially, the smoke will not flow out from the bottom. After about 1-2 minutes, the smoke will change direction and flow out slowly from the bottom. This is a normal phenomenon. Please wait patiently. You must use a backflow cone to have a backflow effect.Only this special backflow incense combined with this incense burner can achieve the effect of reflux.Please be sure to align the holes of the return incense with the holes of the incense burner to promote the flow of smoke. The smoke contains particles heavier than air. As long as there is no wind around and no hot gas rises with the smoke, the smoke will sink.(Note: do not use continuously, because the high temperature of the hole after use will affect the reflux effect of flue gas.) When the cone burns, it will produce natural yellow vegetable oil, so it is necessary to regularly clean out the flue to prevent oil accumulation and blockage. Ceramics are fragile products. If they are broken during transportation, please contact us for replacement. If you are not satisfied with the result, please contact us in time, and we will provide you with a satisfactory reply.