SPECIFICATIONS:
ngel Point: 135° split point
Material: high speed steel
Multiple sizes for your choice
3.5mm,Tool length:39mm Overall Length:70mm,
4mm,Tool length:43mm Overall Length:75mm,
4.2mm,Tool length:43mm Overall Length:75mm,
4.5mm,Tool length:47mm Overall Length:80mm,
4.8mm,Tool length:47mm Overall Length:80mm,
5mm,Tool length:51mm Overall Length:85mm,
Only for cold-rolled steel, quenched parts and preparations are strictly prohibited
- Can be used radial drill, bench drill or hand drill chuck for drilling operations.
Packing Included
10 x twist drill
INSTRUCTIONS FOR USE:
Twist drill is a cutting tool, mainly used for metal drilling, so the control speed is very
The essential.
2) The recommended speed of this product: 100-800R/MIN, the larger the diameter, the slower the speed requirement
3) 6542 high-speed steel twist drill has a hardness of HRC63-65 degrees, suitable for metal drills <38 degrees
Hole, quenched parts are strictly prohibited
4 When working with manual drills, pay attention to adjusting the rotation speed. If the rotation speed is too fast, the drill bit is easy to be damaged.
5) This product must not be knocked during use, the work must be fixed, and the work will break when it swings during operation.
drill
WARNING: To avoid injury, the use of shields, guards and wrap around safety goggles is recommended.
ngel Point: 135° split point
Material: high speed steel
Multiple sizes for your choice
3.5mm,Tool length:39mm Overall Length:70mm,
4mm,Tool length:43mm Overall Length:75mm,
4.2mm,Tool length:43mm Overall Length:75mm,
4.5mm,Tool length:47mm Overall Length:80mm,
4.8mm,Tool length:47mm Overall Length:80mm,
5mm,Tool length:51mm Overall Length:85mm,
Only for cold-rolled steel, quenched parts and preparations are strictly prohibited
- Can be used radial drill, bench drill or hand drill chuck for drilling operations.
Packing Included
10 x twist drill
INSTRUCTIONS FOR USE:
Twist drill is a cutting tool, mainly used for metal drilling, so the control speed is very
The essential.
2) The recommended speed of this product: 100-800R/MIN, the larger the diameter, the slower the speed requirement
3) 6542 high-speed steel twist drill has a hardness of HRC63-65 degrees, suitable for metal drills <38 degrees
Hole, quenched parts are strictly prohibited
4 When working with manual drills, pay attention to adjusting the rotation speed. If the rotation speed is too fast, the drill bit is easy to be damaged.
5) This product must not be knocked during use, the work must be fixed, and the work will break when it swings during operation.
drill
WARNING: To avoid injury, the use of shields, guards and wrap around safety goggles is recommended.
