Go Kart 30 series torque converter belt Reinforced Power Drive Belt For Manco 5959 Comet 203589 203589A Asymmetric Correa

The quality and reliability of our belt are a result of modern lines and production processes, whose precision is verified by leading automotive companies and independent certification companies.  This is not a original product, the size is a little different with the original belt, but does not affect the use Items:1 piece 30 sery torque converter belt Model:For Manco 5959,  For Comet 203589 Part No:203589/5959,203589A  Features:Aramid fibers reinforced belt,Wear-resistant ,high tensile strength Specifications:arround 3/4"" Wide, 20 1/2°, 27 1/32'' length, Asymmetric (18° + 2 1/2°) angled each side Fitment:  The go-kart drive belt used on most Manco, American Sportworks and Ken-bar Karts with 5hp-7hp engines. Center to Center Spacing for the Driver and Driven Pulley needs to be Between 6 5/8"" and 6 11/16"". Fits American Sportworks Black Fox, Conquest, Fox 2x5, Fox LXT, Havoc, Red Fox LXT, Silver Fox, Vortex, Manco 285 and 286 Dingo, 485, 486, 606 Model Go Karts and more How To Install a Belt: Remove the bolt and any keepers from the end of the engine crankshaft, and take the outer half of the clutch off. Clean the clutch. Make sure both components are perfectly aligned. Flat washers and shims are used as spacers. Do whatever it takes to align    both components so the side of the belt won't wear down prematurely and litter the system with belt debris. Align the sprockets so the chain will stay on. If you can install the belt without taking the clutch apart, the belt is too long. If the system is 'eating belts' do not install a new belt until the problem has been corrected. A damaged belt is the symptom of another problem. Some machines may require a different belt if the original engine has been replaced, which usually changes the center distance, or, if the original driven pulley has been replaced with a diffe