This is a 3.3V running the 8MHz bootloader (select 'Duemilanove w/ 328' within the software).
Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need.
The Arduino Pro series is meant for users that understand the limitations of system voltage (3.3V), lack of connectors, and USB off board.
We used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset.
The Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work.
Features:
ATmega328 running at 8MHz with external resonator (0.5% tolerance)
Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, accelerometers, sensors, etc)
USB connection off board
Supports auto-reset
3.3V regulator
Max 150mA output
Over current protected
Reverse polarity protected
DC input 3.3V up to 12V
On board Power and Status LEDs
Note:
1.The product is used for learning.
It's Prohibited for any other purpose.
2.Suit for people above 18 year's old with 1 year electronic diy experience.
Or use it correctly under the guidance of electronic specializer.
3.Please wear anti-static gloves or bracelet when operate electronic products.
Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need.
The Arduino Pro series is meant for users that understand the limitations of system voltage (3.3V), lack of connectors, and USB off board.
We used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset.
The Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work.
Features:
ATmega328 running at 8MHz with external resonator (0.5% tolerance)
Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, accelerometers, sensors, etc)
USB connection off board
Supports auto-reset
3.3V regulator
Max 150mA output
Over current protected
Reverse polarity protected
DC input 3.3V up to 12V
On board Power and Status LEDs
Note:
1.The product is used for learning.
It's Prohibited for any other purpose.
2.Suit for people above 18 year's old with 1 year electronic diy experience.
Or use it correctly under the guidance of electronic specializer.
3.Please wear anti-static gloves or bracelet when operate electronic products.
