GIDERWEL Smart ZigBee Controller with 12V RGBW LED Strip Lights Works with Hue Bridge,Lightify Hub and Amazon Echo Plus for APP and Voice Control 16.4ft RGB Cold White Strips Light kit

Remarks?The Zigbee Strip Controller works with ZigBee Light Link Gateways/ like "Hue",Lightify Hub,Homee,Smart Friends and Amazon Echo Plus,But this zigbee strip controller don't compatible with Wi-Fi Device of the 2nd Gen Echo dot and the 3nd Gen Echo,They must be Link to the Zigbee Hub (Hue Bridge and Lightify Hub) Specification: Input Voltage: DC12V-24V Output Max Current: 6A/CH Total Output Current: 15 A Max Load Power:180W(12V) / 360W(24V) Connecting mode: common anode Controled Method:ZIGBEE ZLL Connection Mode:APP Control. Connection with Gateway: 1. Connect the LED product to the controller see section "wire connection". 2. Start the device searching on the ZigBee Light Link Gateway, it could take some time.If the Gateway does not find the device, plug power off/on or make a reset. 3. The Gateway found your device and you can assign it to the different rooms/zones/groups. Reset: 1. Switch on your device. 2. Now switch off and on within 2 seconds. 3. Repeat off/on four times. 4. Reset is done when the device is switched on in the fifth time and the light stays on after blinking 4 times. Package include: 1 x Zigbee Strip Controller 1 x 16.4ft RGBW Strip light 1 x UL Listed 12V Power Adapter 1 x instruction book