Gemm Piano Tuning Pin Stringing Crank -Ball Handle-

Professional Tuning Pin Crank one piece with hardwood handle. Has a square tip opening that fits onto tuning pins for easily winding coils. Nickel plated steel crank Measures: 2-1/8" in width from the shaft centers Ball handle is 1-3/4"diameter Qty: 1 Follow the step-by-step directions given in learning to use the tuning pin crank. 1. Holding the tuning pin in your left hand with the hole in the pin (the eye) facing you, use your right hand to insert the becket of the wire into the eye of the pin (Photo 2) 2. Maintaining a firm pressure with your thumb on the string while cradling the pin in the crook of your fingers (Photo 3). With your right hand, slowly begin to turn the crank in a clockwise direction with 3 turns. 3. Let the pin rotate freely in the crook of your fingers (Photo 4). Push hard on the wire to avoid having the becket pop out of the eye of the pin. If this hurts your thumb, you might consider wearing cloth or leather work gloves. Some technicians wear gloves as a matter of course to avoid getting oil from their skin on the string. 4. When removing from the eye of the pin (Photo 5) inserting a small flat-bladed screwdriver under the first turn of the coil in next to the becket, and levering the string out of the eye. 5. The completed coil (Photo 6). To insert on a new or existing pin, line the wire end up with the eye the pin, and squeeze the becket in place with a pair of pliers. DO NOT USE this tool as a Hammer Tuning Lever The #1 choice for Piano Technicians. Made in United States