GAS LEAK DETECTOR
FEATURE
Power Saving: Automatic power off after 5 minutes without operation or gas detection.
Low Battery Indicator: When the battery voltage is lower than 2.4V, the power indicator light will blink.
Adjustable Sensitivity with Dual Range: Low Sensitivity Mode: 500 to 1,000 ppm*; High Sensitivity Mode: 50 to 500 ppm*. (*based on Methane detection)
SPECIFICATIONS
Sensor: Gas-sensitive semi-conductor
Reaction range: 50~100OPPM(methane)
Reactions Sensitivity: >50ppm(methane)
Test Gas(partial list): acetone, Acetylene, alcohol, ammonia, benzene, butane, ethanol, oxirane, gasoline, hexane, hydrogen, methane, naphtha, natural gas, paint thinners, propane, solvents, etc.
Warm-Up Time: Approx.30sec
Reactions time: <=500PPM: Approx.5sec ; >500PPM: Approx.2sec
Alarm mode: visible and audible
Operating conditions: 0 to 50? /20 to 80% RH
Storage conditions: -10 to 60°C / 20 to 80% RH (excluding batteries)
Batteries: 2x1.5V AAA Alkaline battery
NOTICE
Please turn it on in a clean-air environment until the warm-up is completed in about 30 seconds
