COMPATIBILITY:
Compatible with all GTO Mighty Mule gate openers models: 350, 500, 502, MM260, MM271, MM360, MM371W, MM372W, MM560, MM562, MM571W, MM572W, MM600, MM660 etc.
PROGRAMMING:
Step 1?Remove the Transmitter Cover
Use a small Phillips head screwdriver to remove the two screws on the back of the remote. Remove the front cover, the battery and the DIP switches will be exposed.
Step 2?Set the Transmitter DIP Switches
There are 9 transmitter DIP switches; each can be placed in three different positions (+, 0, -). To set a new code, use a small screwdriver to move the switches. After setting the DIP switch to a personal code, reinstall the remote with a Phillips head screwdriver.
Notice:
1. Do NOT set all the switches in the same position, such as all + , all 0 , or all - .
2. The original DIP switches are all in "0" position, please set the DIP switches to personal code.
3. No other adjustments should be made inside the remote control.
Step 3?Teach the New Code to Control Board Memory
1. Press Learn Remote Button for 1 second on the control board then release.
2. Press transmitter button, the status LED flashes once.
3. The new code is stored in control board memory.
Step 4?Delete transmitter code from control board memory
Press and hold Learn Remote Button on control board unit status LED goes off (about 3 seconds), the code is deleted.
PACKAGE: 2*remote controls (23A 12V Alkaline battery included); 2*mental visor clip; 2*English programming manuals.
