Gaco Patch Silicone Roof Sealant - Sausage Pack -1 Gray-

GacoPatch is a flashing grade, stand-alone silicone roof sealant designed to be installed in a single application on a variety of roof types including asphalt, single ply, metal, and most existing coatings. GacoPatch is now available in both a 2 gallon pail and a sausage tube. It is a one-step application which reduces labor time and eliminates the cost of additional products such as primers, tapes, and top coats. GacoPatch is a long-term solution for roof repairs because it is UV stable and does not chalk, crack, become brittle or break down over time. GacoPatch contains no asphalts or acrylics, and remains permanently flexible, even under ponding water. No additional reinforcement or extra application steps are required for horizontal patches, even over ½” thick. APPLICATION: Knead and roll tube prior to application. Apply to patch area at a minimum wet thickness of 1/8” and spread at least 3” in all directions from the affected area. For cold weather applications (ambient temp <40 °F (4 °C)), keep GacoPatch stored above 65 °F until application. Do not apply to substrates below freezing or above 120 °F. DRY TIME: At ?" thick, at 75 °F and 55% relative humidity, GacoPatch will be tack-free in 4 hours, fully cured in 40 hours, but can be rained on within 60 minutes. Product is moisture cure; low humidity will result in longer cure times. APPLICATION OF TOPCOAT: GacoPatch is UV stable. No top coat is required. Product is not intended to be painted or covered over with any product OTHER than GacoFlex silicone roof coatings when applicable. COVERAGE: 7.8 gallon per 100 ft² when applied at 125 wet mils: 1.8" thick NOTE: Application rate is job-specific. Additional material may be required.