G-Real Keyhole Light Lamp Battery Operated PIR Infrared Wireless Auto Sensor Motion Detector Door Keyhole with 4 LED Light Lamp Tap Lights LED Night Light for Key Hole-Door Lock

Specification:     Material: Plastic.     Light source: 4 x LED.     Sensitive angle: 60 degrees.     Sensitive distance: 3 m/ 118 inch.     Delay time: 6-8 seconds.     Working temperature: -5 to 38 degree Celsius.     Working Humidity: 5% -93%.     Power: 1.5V.     Standby current: <0.1mA.      Power: one fifth battery (AA).     Installation: Use double-sided tape (with) or use M3.0X20 mm screws (not included).     Usage: placed on the door, kitchen, safe case, wardrobe, drawers, car glove box, etc for infrared sensor lighting.     Please note that the battery needs to be purchased by yourself. Troubleshooting:     1. When the power is turned on, the light does not light. Solution: A. Check the polarity of the battery installation. B. When the ambient light is too bright, the lamp is in standby mode. C, the battery is not charged, please replace the battery.     2. When the power is turned on, the LED light flashes. Solution: A, the host needs one to two minutes to stabilize the internal circuit, B, the battery may be low, please replace the battery. Note:     Please allow 1-5mm errors due to manual measurement.     Do not place the product in a position facing the glass door or where the temperature changes drastically.     Please keep the lamp away from the monitor and TV.     Please pay attention to the temperature and humidity of the working environment, otherwise the battery life will be affected.     LED lights should not directly target people's eyes, especially children. Package included:     1