FYSETC 3D Printing Buildplate Steel Spring Sheet Bed w/Corner Cut 220x220mm/ 8.6x8.6 inch with PEI B Magnetic Mounting Base for Anet A8 Wanhao Duplicator i3 Monoprice Maker

Feature: PEI Sheet Install: (please Cut off the extra corners by yourself? The Polyetherimide sheet comes with 3M 468MP adhesive already laminated to the PEI. Apply the PEI with slight pressure and at an angle to prevent and minimize air bubbles. Once applied set the print bed to 60C and apply pressure evenly across the PEI in a sweeping fashion to firmly set the adhesive. Please use a towel to avoid getting burned. Level the bed and set the height of the nozzle before printing. PEI Sheet Use? Thickness: 0.17mm Compatible with PLA ABS PETG TPU and other most filaments. When the print is completed, let the bed cool, and the part will be easy to release from the PEI surface. Parts are actually easier to remove if released before the bed becomes completely cold. PEI Sheet Maintenance: Clean in between prints with isopropyl alcohol and a lint free rag. Acetone can be used instead of isopropyl alcohol, but the bed must be cold if acetone is used. Optionally, light sanding with 600-1000 grit sand paper can be done after lots of printing to give the PEI sheet more life. Magnetic Base: Magnetic base that is adhesive-backed for easy installation Package Includes: 1X 220mm Steel Spring 1X 220mm PEI 1X Magnetic Base with 3M adhesive After Sales Guarantee: each one defective item can have the free replacement or refund, if you meet any issues, please feel free to email or Q?A us, we will try our best to assist you.