fushionsea 433MHz Remote Control Switch DC 24V Wireless Remote Relay Security 1 Channel 40A Relay Receiver with 2 Black Transmitters

About Receiver: Model No.: 24V1K40A 1. Working voltage: DC24V 2. Working temperature: -40 Degree +80 Degree 3. Receiver sensitivity: more than -105dBm 4. Working frequency: 433mhz 5. Output voltage: DC24V 6. Input voltage = Output voltage 7. Max load current: 40A 8. Size: 8.2 x 5.0 x 3.1cm About Working way: Working way changed by learning button Latched: Press learning button . Until the receiver Led indicator flash for 1 times, it mean Change Latched successfully. Relay: Press -> On; Press other button -> Off. Momentary: Press learning button . Until receiver Led indicator flash for 2 times, it Change Momentary successfully. Relay: Press and hold -> On; Release -> Off. Toggle: Press learning button . Until the receiver Led indicator flash for 3 times, it mean Change Toggle successfully. Relay: Press -> On; Press same button again -> Off· 5 seconds delay: Connect set point with tweezers . Until the receiver Led indicator flash for 4 times, it mean Change Delay time successfully. Relay: Press -> On , relay actuates and keeps working until the time out.(5S) About Learning and clearing Method: Learning: Input 24V for the Receiver , Press learning button , The receiver Led indicator ON. Press remote button “ON” 1 time, Led indicator flash for 1 times , Then Press remote button “OFF” 1 time , Led indicator flash for 1 times again , it mean learning successfully Clearning: Connect set point with tweezers . Until the receiver Led indicator flash for 5 times, it mean Clearing Code About Transmitter: 1.Buttons: 2 Buttons 2.Working Voltage:DC6V (2PCS CR2016) 3.Operating frequency :433MHz 4.Remote Distance: 20-50M 5.Operating Current: 13 mAh 6.Encode: Fixed code / EV1527 code 7.Size: 5.7 x 3.2 x 1.1cm Package Includes 2 x Transmitters 1 x Receiver 1 x User Manual