The Leather Re-Coloring Balm renovates the color and aspect of all leather items both old and new. There are 21 colors formulated for use on leather from a dark to light shade.
It works great at re-coloring areas that have been exposed to sun light or direct heat, and is ideal for coloring cat scratches and re-coloring dried out and faded areas. The re-coloring balm 100% absorbs into your leather so will not rub off onto any clothes.
Note: This product is designed to work on absorbent leathers only. To test your leather for absorbency, simply drop a small amount of water onto an undamaged area of your leather and wait 5-10 seconds. If the water sinks into the leather and leaves a darker patch, you have absorbent leather. If the water stays on the surface, your leather is not absorbent and you will need to use Leather Colorant to restore its color.
Only one application is necessary. With use, the leather will fade again but this can be reduced by using the Leather Protection Cream. The Balm is generally re-applied once every three years.
Instructions for use
Step 1: Clean the leather first before applying the Balm, for best results use Furniture Clinic Leather Ultra Clean - This is because Leather Ultra Clean deep cleans the leather to remove all dirt, but also opens up the pores of the leather so the Re-Coloring Balm will take to the leather in a better fashion.
Step 2: Rub the Balm into the leather, with a clean cloth or sponge, in a circular motion to ensure penetration. This is enough to completely restore the color. Take a clean cloth and then buff the surface of the leather. Make sure there is no excess Balm left on the leather.
Step 3: Protect your leather to prevent staining and extend its functional life, Furniture Clinic Leather Protection Cream is advised for this.
It works great at re-coloring areas that have been exposed to sun light or direct heat, and is ideal for coloring cat scratches and re-coloring dried out and faded areas. The re-coloring balm 100% absorbs into your leather so will not rub off onto any clothes.
Note: This product is designed to work on absorbent leathers only. To test your leather for absorbency, simply drop a small amount of water onto an undamaged area of your leather and wait 5-10 seconds. If the water sinks into the leather and leaves a darker patch, you have absorbent leather. If the water stays on the surface, your leather is not absorbent and you will need to use Leather Colorant to restore its color.
Only one application is necessary. With use, the leather will fade again but this can be reduced by using the Leather Protection Cream. The Balm is generally re-applied once every three years.
Instructions for use
Step 1: Clean the leather first before applying the Balm, for best results use Furniture Clinic Leather Ultra Clean - This is because Leather Ultra Clean deep cleans the leather to remove all dirt, but also opens up the pores of the leather so the Re-Coloring Balm will take to the leather in a better fashion.
Step 2: Rub the Balm into the leather, with a clean cloth or sponge, in a circular motion to ensure penetration. This is enough to completely restore the color. Take a clean cloth and then buff the surface of the leather. Make sure there is no excess Balm left on the leather.
Step 3: Protect your leather to prevent staining and extend its functional life, Furniture Clinic Leather Protection Cream is advised for this.
