Frienda 2 Pieces 0_96 Inch Display Module 12864 128x64 SSD1306 Driver IIC I2C Serial Self-Luminous Display Board Compatible with Raspberry PI Blue and Yellow

2 Pieces 0.96 inch display module 12864 128X64 SSD1306 driver IIC I2C serial self-luminous display board compatible with Raspberry PI (blue and yellow) Features: The display module is small, only 0.96 inch diagonal, and it is made of 128x64 individual yellow and blue pixels, each one is turn on or off by the controller chip. It works without backlight, and display is higher compared to that of LCD display you will like the miniature for its crispness in the dark. The driver chip of this display module is SSD1306, which is compatible with IIC communication. So this module can be controlled by I2C. That is, except the VCC and GND, 2 wires would be needed when using 4-wires I2C mode. There is also a simple switch-cap charge pump that turns 5v into a low voltage drive for the display module, making this module the easier to get an display into your project. Self-luminous, no backlight. Applications: MP3, MP4, watch, head-mounted displays, meters and other intelligent instruments. Design any pretty patterns for your beloved electronic devices. Specifications: Size: 0.96 inch Driver IC: SSD1306 Voltage: 3.3V - 5V DC Viewing angle: more than 160 degree High resolution: 128 x 64 Working Temperature: -30 to 70 degree Centigrade Display: 2 rows of yellow, 6 rows of blue Module size: 27 x 27 x 4 mm Screen material: glass, need good protection I2C Interface: GND: ground VCC: 3.3V - 5V SCL: I2C serial clock (A5; MEGA: 21) SDA: I2C serial data (A4; MEGA: 20) Package includes: 2 x Display modules 0.96 Inch 128x64 yellow blue Tips: The blue and yellow areas are fixed and cannot be reset. The yellow area is the upper row, and the lower area is blue, as shown in the picture. The mention of brand names and any related models above is only for purposes of demonstrating compatibility, our brand name is Frienda, kindly noted.