for iPhone 8 Screen Replacement Black Kit, CYKJGS 4.7" Full Assembly LCD Display Digitizer with Front Camera Ear Speaker Sensors, Waterproof Seal Repair Tools Screen Protector for A1863, A1905, A1906

High Quality Full assembly iPhone 8 Screen Replacement LCD Display Touch Digitizer 4.7 inch Purchase Notes: 1. Only for iPhone 8 (A1863, A1905,A1906) 2. It never come with HOME BUTTION 3. It pre-assembly with front camera, ear speaker, proximity sensor and silver metal plate What you get? a)1x pre-assembly screen replacement for iPhone 8 b)Repair Tools 1 x Magnetic Screw Mat 1 x Tweezers/ 3 x screwdrivers/ 1 x Pry pick 1 x Suction cup 1 x Dust wipe 1 x Sim card pin c)1 x Screen Protector for iPhone 8 screen Instruction: 1. Make sure your phone is powered off first before installation. 2.Check the screen replacement to make sure the flexible cable in good condition and no debris/visible dust on the connector. 3.Disconnect and reconnect the cable from the motherboard side. 4.Make sure for iPhone IOS is upgraded to the latest version. 5.Leave the phone alone in a dry environment. Something dirt may caused some damage for the replacement. 6.Mark each screw.You might break your screen if put the screw in a wrong hole. If you meet with these issues: Cannot turn on, touch insensitive, flash, lines on screen, ghost click etc. Please try this: Power off your phone, disconnect all the cables including the battery cable, clean the connector on the motherboard, reconnect the cables, leave the phone alone for a while in a dry environment, a hard reset of your phone power on.