for iPhone 7 Screen Replacement, Arotech Pre-Assembled 4.7 Inch LCD 3D Touch Display Digitizer Assembly Kit with Repair Tool, Compatible with A1660, A1778, A1779 All Version (White)

Note: -Only fit for iPhone 7 4.7" (A1660, A1778, A1779), NOT for iPhone 7 Plus . -Please email to us if have any product issue, we will make our best to provide good service for you.  -We will be responsible for any damage during shipping or quality problem. 180 DAYS WARRANTY are provided. Installation Instruction:  1.Please watch our video before installation. 2.Disconnect the battery cable before installation or make sure your phone is powered off. 3.There are many screws when you replacing the assembly which are different in size and length.it may broke the screen if you put the screw in wrong place. 4.If after install the screen there appear regular lines on the screen or the screen can't be touched, please Remove the LCD screen and clean the connectors. Lines are normally caused to the LCD cable is not correct clipped or some dust in the connectors. Question and Answer: Q: Why my phone works but the screen is not displaying? A: When reassembling your phone, the display data cable may pop off its connector. This can result in white lines or a blank screen. If that happens, simply reconnect the cable, also disconnect and reconnect the battery connector. Q: Why the touch function of the screen is not working correctly? A: This is because the digitizer cable might lose connection if not plugged in firmly, you can transfer the foam that attaches to the back of original digitizer cable connector onto the new one. Q: When the screen is placed on phone the phone no longer comes on or seems black A: Reset the phone by holding both Power and Home button together pressed for min 15 sec.