for iPhone 7 Screen Replacement 47 Inch Touch LCD Screen Digitizer Display Pre Assembled Kit with Screen Protector and Repair Tools Black

" Please contact us for any problem before returning, as long as the product cannot work, refund is supported. Note 1: ONLY for iPhone 7 4.7 inch Note 2: This replacement is without home button and front camera, you need to transfer them from your old one. Specification: 1, Screen Size: 5.5 inches 2, Display Type: LED-backlit IPS LCD, capacitive 3D touch screen, 16M colors 3, Resolution: 1920 x 1080 pixels (401 ppi pixel density) 4, Contrast Ratio: 1400:1 Package Include *1 x Screen Replacement Assembly for iphone 6S Plus *1 x Professional Glass Screen Protector *10 x Repair Tools Installation Tips: 1. Power Off --Make sure power off your iPhone before disassembly. 2. Follow instuction--Please Know detailed flowchart or Youtube tutorial before disassembly and installation. 3. Keep screws track--Be sure not to mess up screws. It is imperative that the right screws are inserted into their right holes. Otherwise that may cause damage of logic board and circuit. If your phone meet some problems like cannot turn on,touch insensitive, flash, lines on screen etc, please follow below steps: 1.Please check the LCD to make sure the flex cables are in good condition and there are no debris on the connectors. 2.Disconnect and reconnect the flex cables from the motherboard side. 3.Then Reboot: Hold buttons (Home, Up volume, and Power button) untill the phone switch down and then switch up again. 4.Leave the phone alone for a while in a dry environment. Sometimes there is static after installing that will go away after some time. Please leave phone alone overnight and see if this problem persists in the morning. "