for iPhone 6 Screen Replacement BuTure LCD Touch Screen Digitizer Assembly for A1549 A1586 A1589 with Home Button Front Camera Ear Speaker and Proximity Sensor White

NOTE BEFORE INSTLLATION: ? Make sure your phone is powered off and battery cable is disconnected before installation. This step will protect your phone from incorrect installation short circuit damage. ? Please note that there are many screws that differ in size and length. Each screw should be installed into original location. An incorrect placement of these screws leads to permanent damage to the logic board. ? Check the LCD to make sure the flex is in good condition and no debris on the connector. ? The Touch ID function will only work with your phone's original home button assembly. You will need to transfer the button assembly from your old display to retain Touch ID. ? We have all the product strictly tested before shipment to offer the great product and service to our customers. If there is any question about our product, please contact us via Amazon message in advance, we will try our best to help you solve the problem. Attention : Please test the new LCD display before you fully install this iphone 6 screen replacement. 1.Connect the cable 2.Test screen 3.Test Touch: Long press one of APP and move around the screen, to check the new screen could normal to work or not. Package List: 1 x for iPhone 6 Screen Replacement White 1 x Screen Protector 1 x Repair Tool Kits