for iPhone 6 Screen Replacement-4.7 Inch- LCD Screen Digitizer Replacement for A1522 A1524 A1593 with Repair Tools -Black-

Only fit for iPhone 6 screen replacement 4.7 inch, compatible with (model A1549, A1586, A1589), NOT for iPhone 6S, 6 Plus NOTE: ?Please make sure you identify your Phone correctly before purchase. ?The repair tools comes in the package. ?This iphone 6 screen repair kit without Proximity Sensor, Ear Speaker and silver metal plate, so please transfer them from your old screen and install them. INSTALLATION STEPS: 1. Power off your phone 2. Remove the screws on the bottom 3. Lift up the screen till gap with suction cup 4. Open the rear case with triangle rocker 5. Open the screen and separate from the back cover 6. Remove and remark all screws from the battery connector bracket 7. Disconnect battery cable, display and touch the cable 8. Remove home button assembly of the old screen INSTALLATION NOTE: 1. Don't press four corners and be careful when lock screws, otherwise it will cause inner glass broken. 2. Make sure each screw is installed back to its original hole. 3. Be gentle and cautions to the flex cable connectors when installing. 4. Please check the LCD and make sure the flex cable is in good condition and there is no debris on the connector. 5. DO NOT over-bend or use excessive force to tear it. 6. Please please disconnect battery flex cable of your phone before you install our new screen, this is very important. Otherwise, the screen will not turn on. PACKAGE LIST: 1*LCD replacment for iPhone 6 4.7 inch black 1*Replacement Repair Tools