Folding Shelf Brackets 16 Inch, Heavy Duty Stainless Steel Collapsible Shelf Bracket, DIY Wall Mounted Foldable Shelf Bracket, Space Saving for Bench Table (16 Inch-2Pcs)

Easy to Install and Use: 1. Measure the position of the wall brackets on the board 2. Mark the punch position on the board, fix the bracket on the board (The short arm of the folding shelf is mounted on the wall, the long arm is used to fix the plank.) 3. Use a spirit level to ensure it’s parallel, mark the position on the wall 4. Drill holes at the mark with an electric drill 5. Plugged with nylon expansion tube 6. Secure the folding shelves with screws, and finished Specifications: Product Name: Folding Bracket Material: Stainless Steel Size: 15.8 inch x 7.9 inch Maximum Load Capacity: 330lb/150kg Angle Degree : 90 Degree Hole: Approximately 5mm Installation: Screw Fixing Package: Boxed Package Included: 2 x Stainless Steel Triangular Folding Shelf Brackets 6 x Long Screws for Wall 6 x Plastic Expansion Anchors for Wall 6 x Short Screws for Board Attention: 1. There is no wood board included. 2. The installation location should be horizontal. Make sure the two brackets are parallel to each other and perpendicular to the wall, otherwise the folding will be affected. Tighten the screws to avoid loosening. 3. The screws provided may not be suitable for low-density walls. 4. Please keep dry and clean,Long-term humidity will shorten the service life