Foaming Gun, MANGZ Hand Foam Caulking Gun, PU Expanding Dispensing Foam Spray Gun Application Applicator for Caulking, Filling, Sealing

?TEFLON coated for greater non-stick and reliable performance,easy to clean. ?Adjustable foam bead control allows variable foam bead size control. ? Includes two fine foam dispensing nozzles for foam application in hard to reach areas or in tight spaces. Specifications: Material: TEFLON coated,aluminium alloy body Weight: 314g Length:32cm Height: 18cm The Maximum output pressure: 8 MPa The Maximum injection flow rate: 5L/min Spray width: 3mm Package Included: -1 x Expanding Foam Gun -2 x foam dispensing nozzles Usage: ?Taking a bottle of vesicant, holding the middle of the tank body by hand, shaking the can body along the horizontal direction for at least 20 times to ensure that the tank pre-polymer fully mixed. ? Removing the detergent on the foaming gun, taking off the cover on the threaded valve of the vesicant, screwing the vesicant tank to the foam gun interface along the thread ?Gripping the foaming gun to ensure that the vesicant tank is on the top and the foam gun is under the tank, and then openning flow control valve of the rear of the foaming gun. ? The tip is aimed at the bottom or inside of the part to be filled.It will start the construction when gently pull the trigger.It can be adjust to the appropriate flow through the flow control valve behind the foam gun. ?After a tank of spray, if you want to fill, you can immediately remove the empty cans, according to the step 3 to re-install the vesicant to continue construction. Note: Please clean it with Polyurethane foaming gun cleaner after each use. 1.Clean the exterior and gun tip 2.Spritz the Basket Attachment 3.Then replace the cleaner to flush the interior until foam gone.