Flysky FS-R6B 2.4GHz 6CH Receiver for FS-i6X FS-i10 FS-i6 FS-T6 FS-CT6 FS-GT2

Features: Channels:6 channels Model type:car Frequency bank :2.4G Modulation:GFSK Sensitivity:1024 RF Receiver sensitivity:-100dbm Power:4.5-6vdc Weight:5g ANT Lenth: 26mm Size:37.6*22.3*13mm Color:gray semi-transparent cer For remote control cars Package Includes: 1 X FlySky 2.4GHz 6CH Receiver FS-R6B Manual link: https://drive.google.com/open?id=0B8DSGdAr8_31aHA2MEVNUGV1bmM The supplied transmitter and receiver are already bound at production time so you don’t need to do it. If you are using another transmitter or receiver, you have to first bind them before use as described below: 1. Install batteries in the transmitter and turn it off. 2. Connect the binding jumper to the battery port of the receiver. 3. Connect the battery of the receiver to any channel power supply. The red LED with blink indicating that it is in binding mode. 4. Press and hold the bind key of the transmitter and turn it on. 5. The red LED of the received should stop to blink meaning a successful binding. 6. Disconnect the receiver battery. 7. Turn off then back on the transmitter. 8. Connect all the servos to the receiver and then connect its battery. 9. Check if all servos are working as expected. 10. If anything is wrong, restart this procedure from the beginning.