Welcome to Flylinktech Store!
As time goes on, the battery of the cellphone become abnormal that can't support you the whole day job. Flylinktech was thinking to make a good quality replaced battery to help a lot of customers to solve this battery problem. Replacing the old battery from now on, bring your phone to a new life.
Specifications:
Power: 8.4 Wh
Limited Charing Volt: 4.35V
Rated Volt & Capacity : 3.82V/ 2200mAh
Implementation of Standards: GB/T18287-2013
Packing List:
1 x Replacement Battery for iPhone 7
1 x Y Screwdriver
1 x Phillips Screwdriver
1 x Pentagram Screwdriver
1 x Hard Plastic Plectrum
1 x Set of Adhesive
1 x Suction Cup
2 x Blue Opening Tool
Note:
1. We strongly recommend you to watch the installation video before you replace the battery. After watching the video, you will find that it is not very difficult to replace the battery.
2. We suggest that the power should be 100% used up and fully charged for 3-5 times after finished replacing the battery, thus the battery can be reached the optimum effect of using.
3. If you are unable to turn your phone on after installed, please reinstall the ribbon cable, check its connector and clip it hard. Next, charge your phone for 20 minutes or longer. Then try to turn on your phone once again.
4. Please do not use Metal Tweezer to touch battery cable connector and other circuit. otherwise it will cause short circuit.
