Instructions for use:
1. Park the vehicle on a level and hard road before lifting, tighten the handbrake to prevent the wheels from moving, and turn on the hazard warning signs.
2. Block the wheel opposite the tire that needs to be replaced, loosen the nut of the tire that needs to be replaced, but do not unscrew it
3. Place the jack under the lifting part specified by the car factory, and use the handle to lift the jack to a suitable height
4. After replacing the tire, tighten all the fixing nuts of the tire by hand. Lower the jack and complete the tire change.
5. For safety reasons, the car manufacturer recommends that the weight of the vehicle is less than 80% of the jack's load range.
Precautions:
1. Do not overload the use!
2. This product can only be used as a support and cannot be used as a fixed support.
3. When supporting the vehicle, it is strictly forbidden to enter the bottom of the vehicle.
4. Immediately stop using if there is a skew during the erection process, and use it after adjusting the position.
Care and maintenance
1. When the jack is not in use, the boom should be in a fully downward position.
2. Always keep the jack clean and keep the screw and bearing well lubricated.
3. Store the handles carefully.
