Feature:
1.Dual LED digital display
2.Waterproof NTC sensor
3.Safe and reliable intelligent control
Description:
1.Model:XH-W1219
2.Control Range:-50~110 celsius
3.Control Precision:0.1 celsius
4.Measuring Input:NTC10K waterproof sensor L=0.5m
5.High Temperature Alarm:-49~110 celsius
6.Input Voltage:DC 12V
7.Output Type:relay output 10A (max)
8.Return Difference Setting:0.1~30 celsius
9.Delay Starting:0-10min
10.Temperature Calibration:-10~10 celsius
11.Size:60*43*16mm
How to use:
P0.Temperature Control Mode:when first use this product;if it is used to heating,please set H,if used to cooling,please set C
P1.Return Difference Setting:long press SET key entering into internal setting,choose P1 seting;then press SET key to achieve return difference value setting
P2:Temperature Calibration:this function is for temperature calibration.If detection temperature and actual temperature is different,then usrs can apply this function to calibrate
P3:Delay Start:this function is for compressor cooling
P4:Set High Temperature Alarm Value:when actual temperature is higher than this value,screen will flash and sound an alarm
Restore Factory Settings: While power is on, press and hold the + - button for 3 seconds
Instructions:
1. Please pay attention for your first use. You need wait 6s after your setting data, the module will save the date you have set after 6s.
2. Short press button SET: If you start the time setting mode , Nixie tube will blink. You could adjust the time T1 and T2 by button+ and button-. Please wait 5s after your setting date, the module will save the date you have set after 5s
3. Long press button SET: if you start the parameter setting mode. There are two group parameter for your choice : P0 and P1. You could switch P0 or P1 by short press SET. Under the parameter P0 and P1,you could