Fence Fixer Rural Wire Strainer Stretcher Ultimate Chain Fence Strainer Home Fence Repair Tool Stretcher for Fence Gardening Farm Fence Tensioner Puller Heavy Duty Fence Plain Barbed Wire Strainer

Our fence stretcher simplifies and speeds up the job compared to the fence stretcher that everyone is used to using and every rancher should have this fence repair equipment. Using a conventional fence stretcher requires cutting and splicing a sagging wire. On the other hand, with our Fence Fixer there is no cutting, splicing or kinking of the wire. How to Use Correctly: To use our Fence Fixer, simply spread the hinged handles apart. This will open up a slot for the wire to go in at the top of each handle. Place the top of the tool underneath and perpendicular to the sagging wire, laying the wire across the top of the tool and inside the slots that opened up when you spread the handles apart. Next, pull the handles of the fence fixer together. You will find that the slots will close down upon and grip the wire. As the jaws gripping the wire come together, you’ll be pulling all the sag out of your once loose wire. When you have the wire stretched sufficiently, fasten the handles together with the attached chain. The excess wire that you pulled will be bulging up in the middle of the fence fixer in a “U” shape. Next take a short piece of barbed wire and wrap one end of it at one side of the Fence Fixer with three or four turns. Repeat what you just did with the other end of the short wire on the opposite side of the Fence Fixer so that the short wire is tied across U shaped wire. Place the handle of your fencing pliers between the U shaped wire and the short wire you tied across it and twist them together. Last that’s done. Unfasten your Fence Fixer is ok.