Fence Fixer Fence Repair Tool Ultimate Fence Stretcher Chain Fence Strainer Home Fence Repair Tool Stretcher for Fence Gardening Farm Fence Tensioner Puller Heavy Duty Fence Plain Barbed Wire Strainer

The Fence fixer will be one of your favorite fence stretcher type tool. It simplifies and speeds up the job compared to the fence stretcher that everyone is used to using and every rancher should have one among their collection of fencing equipment. Using a conventional fence stretcher requires cutting and splicing a sagging wire.On the other hand, with our Fence Fixer there is no cutting, splicing or kinking. In other words there’s no weakening of the wire. To use conventional fixer spread the hinged handles apart. But ours will open up a slot for the wire to go in at the top of each handle. Now place the top of tool underneath and perpendicular to the sagging wire. Next lay the wire across the top of the tool and inside the slots that opened up when you spread the handles apart. Simply pull the handles of the fence fixer together at this point. You’ll find that the slots will close down upon and grip the wire. As the jaws gripping the wire come together you’ll be pulling all the sag out of your once loose wire. When you have your wire stretched sufficiently simply fasten the handles together with the attached chain. The excess wire that you pulled will be hanging down in the middle of the fence fixer in a U shape. Now take a short piece of barbed wire and wrap one end of it at one side of the U with three or four turns. Repeat what you just did with the other end of the short wire on the opposite side of the U. Your almost done now. Next place the handle of your fencing pliers between the U shaped wire and the short wire you tied across it and twist them together.