Full HD 3D 1080P 60M HDMI Extender Over Single CAT5E CAT6 Ethernet Cable for HDTV Projector and Monitor
1. This twisted pair extender uses two CAT6 cables to extend your HDMI signal by 60M.
2. Not only does it break the transmission limit of HDMI Cable, but the important thing is that CAT6 has more flexibility and convenience in wiring construction. Because the connector of HDMI cable is very large, it must be used in a hidden way. Moreover, the HDMI cable is not easy to bend when transmitting in the wall. However, the CAT6 cable does not have such trouble. Due to the Cat type cable which is advantageous for integrated wiring, the cost is low and the construction is more convenient. The device is widely used in high-definition advertising systems, conference systems, home entertainment and other occasions.
Applicable environment:
Home, living room, factory, data monitoring center, business, conference, education, and so on: Extend 1080P full HD HDMI signal by 60 meters through CAT5 or CAT6 dual network cable
Product instructions
Please prepare the set-top box, HMDI display device and the required length of the network cable before installation and commissioning. The crystal head crimping on both sides of the cable is arranged in the same way. Please confirm that the power is off before installation and install in the following order.
1. Connect the HDMI signal source and the transmitting end with the line standard of the extender;
2. Plug one end of the network cable into the network port on the transmitter;
3. Connect the power adapter of the receiving end;
4. Connect the HDMI port of the receiving end to the HDTV with an HDMI cable;
5. Turn on the power of the set-top box and activate the LCD TV to switch to the HDMI input
