Farstrider Premium HDMI Extender by TCP/IP Over Ethernet Over Single Cat5e Cat6 Cable Up to 395ft(120m) with IR, Support 1080p HDMI 1.3, HDCP 1.2, 1.1, TCP/IP Standard - (Transmitter and Receiver Set)

INTRODUCTION -The FARSTRIDER HDMI Extender Over Ethernet is based on TCP/IP standard, so you can use IP switch box. It transmits your HD display with the high resolutions up to 395 feet (120 meters) away from your HDMI or DVI-D source by using 1 CAT5e/6 cable. With the advantage of TCP/IP standard you can extend your HD video to multiple displays by using an Ethernet Switch. PACKAGE CONTENTS 1)Sender 2)Receiver 3)2 x 5V DC Power 4)1 x IR transmitter and 1 x IR receiver 5) User's Manual SPECIFICATIONS - From the Manufacturer HDTV Resolutions: 480p,576p,720p,1080p Audio: Sample rate: 32kHz, 44.1kHz and 48kHz IR remote control: 38KHz; NEC HDMI: HDMI 1.3 HDCP: HDCP 1.2, 1.1Power adapter: Input: 100V - 240V (50 - 60Hz) Power consumption: Sender: 3W Receiver: 3W Operating and Storage Temperature/Humidity: 0- 70 degrees/10% - 80%RH(no condensation) & -10 - 80 degrees/ 5% -90% RH(no condensation) CONNECTION AND OPERATION Easy To Use 1)Connect the HDMI source (such as DVD, PS3, STB ) to the HDMI IN of Sender. 2)Connect the IR sender to the Sender IR OUT Port, and be Directed at HDMI video source¡¯s IR receiver. 3)Connect the HDMI out of Receiver to HDTV display. 4)Connect the IR receiver to the Receiver IR IN Port. 5)Use 1 Cat5e/6 cable up to 120m to connect the Sender and Receiver. 6)Plug 2 pieces of 5V power supply into the Sender and Receiver. 7)Power on the HDTV display and HDMI source. WARRANTY - 1 year warranty from FARSTRIDER-After you receive our products, if you feel satisfied with us, please give us a feedback as an encouragement, if not, please contact us and we will serve you until you are satisfied