Micro Oil Fluid Water Pump for Electric Drill, Portable Self-Priming Drill Pump with 8mm Shank
Specification:
Color: Black
Material: Engineering plastics
Product Size: 106 x 37 x 64mm
Pump Shank: 8mm round shank
Pipe Inner Diameter: 15mm
Working Temperature: 5°C-49°C
Fitment: For electric drill
CAUTIONS:
1. In order to get optimum priming and long service life, apply a spot of lubricating oil in the pump inlet before use and flush with water after each use.
2. Be sure the inlet hose is airtight and as short as possible. Inlet hose should not exceed 9ft(2.75M).
3. When pumping abrasive fluids or liquids with solids, please attach a strainer on the inlet to prolong the service life of the pump.
4. It is recommended to mount the pump to a surface for security and ease of use.
5. Mount and start drill. Watch inlet tubing to be certain fluid is drawn into the pump in15-20 seconds. If not, check that the inlet tube is properly mounted to inlet.
6. No dry running. If the pump fails to prime, check to be sure that hoses are not kinked or clogged.
7. DO NOT run the pump in reverse.
Note:
Please allow 1-3cm (0.4-1.18") difference due to manual measurement and slight color variation for different display setting.
Thank you for your understanding, nice day!
Package Includes:
1 x Drill pump
2 x Hose clamps
2 x Connectors
FAMKIT Micro Oil Fluid Water Pump for Electric Drill Portable Self-Priming Drill Pump with 8mm Shank
Was:
$87.22
Now:
$43.61
- SKU:
- V426518
- UPC:
- 4147103144081
- Condition:
- New
- Availability:
- Free Shipping from the USA. Estimated 2-4 days delivery.