FAINAT Hotfix Rhinestone Applicator, 7 in 1 Professional Iron-on DIY Hot Fix Tool Rhinestone Setter Applicator Wand Tool Kit Set with 7 Different Sizes Tips (Pink)

This is a DIY Hot-Fix rhinestone applicator that can add sparkle rhinestones to your items including clothing, purses, cell phones, belts, dolls, scrapbooks and more. It works with those materials need to be able to absorb the adhesive when it’s melted, like Leather, Paper, Card, Cotton, Linen,Silk, Synthetics. Product parameter : Power: 10-12W Voltage: 100-240V Dimension: 18.5 x 4 x 2.6cm. cable: 126cm length. On/Off switch for more convenient Heat up in just 2-3 minutes WorkingTemperature: 428°F/220°C How to use 1. Install the hotfix tips and preheat the Hot-fix Applicator for 2-3 mins. 2. Arrange the rhinestones in the patterns you want. 3. Hold the applicator like pen, vertically, apply on the hot-fix rhinestones, wait for 3-5 seconds. Kindly Notes 1.The applicator tip and the stones gets very hot during applying. Do not touch them with your fingers! 2.Wait until the tip cools off before changing tips. Do not screw and unscrew the applicator tips when it is still hot. 3.This hotfix applicator only works for hotfix rhinestones. The hotfix rhinestone has glue at the bottom, which will be melted and sticky after heated up by the applicator wand. 4.The applictor cannot pick up any stones before heats up. So MAKE SURE to preheat the applicator wand (takes about 2 minutes to heat up) before trying to pick up or apply any hotfix rhinestones.