EZDIY FAB Dual M 2 Adapter for SATA and PCIE NVMe SSD with 5V ARGB Heatsink Support NGFF PCIe SSD M Key M2 SATA SSD B M Key 2280 2260 2242 2230

The only M.2 SSD adapter with RGB effects in Market.: This is a beautiful LED cooling system with various RGB color effect. 3 Pin 5V ARGB header, you could change color by using built-in mode or Sync with Motherboard. Compatible with ASUS Aura Sync, MSI Mystic Light Sync, ASROCK AURA RGB, Gigabyte fusion. By using switch to Motherboard mode or Manual mode. Long press for 3 secs to Sync with motherboard.(Sync motherboard cable needs to be connected) Features: 1. Supports M-KEY for insert into M.2 NVME PCIe solid state drive, PCIe channel data transmission without the need for external SATA line 2. Supports B-KEY for insert into M.2 NGFF SATA solid state drive hard disk, and then plug into the SATA line to connect motherboard with PCIe power supply (no external power supply) 3.. Supports PCIe x 4 / x8 / x16 slot 4. Only with full-profile slot brackets 5. Compliant with PCI Express M.2 specification 1.0 6. Compliant with SATA 3.0 specification for B/ B+M key 7. Compliant with PCI-E 4X 3.0 specification for M key Specifications: 1. For B key SSD the SATA 7 pin connector must be connected to motherboard. 2. For M key SSD there must be a 2.0 or higher PCI-E 4X socket. 3. If there is a exclamation mark after install the adapter, please ask for SSD supplier to install the NVME driver for SSD Note1: NVMe native driver for Windows 7 and Windows Server 2008 R2 is available from Microsoft Knowledge Base, KB2990941. Note2: Mac Pro 2009, 2010 and 2012 models support PCIe-AHCI SSD only.Make sure insert or remove SSD when power is off. Packages: 1 x Dual M.2 SSD PCIe 3.0 x4 Card with large passive heatsink 2 x Silica gel pad 1 x SATA Cable 4 x Mounting Screw 1 x Screwdriver 1 x Screw for PCIE bracket 1 x Motherboard Sync cable 1 x Gigabyte fusion adapter