Extractme Chassis Fan Hub CPU Cooling Hub Fan Controller 12V 4 Pin 10 Port Fan PWM Fan Hub SATA Controller

What the product designed for: This chassis fan hub speed controller is an excellent product that will deliver results when there aren't enough computer fan connectors on a motherboard. This is perfect for running multiple fans & it will be easier to control them. You can use these if you don't have enough computer fan headers for all the fans. If you don't want to use dedicated CPU port for fan control you can always use the BIOS if your motherboard provides that option. Product Basic Information 1. This PWM hub SATA accurately controls fan speed, you can slow down & speed up the fans up to the maximum speed. 2. It's minimalistic by looks, sleek & thin structure (75 X 48 mm). 3. This is an excellent unit, does exactly as expected & provides dedicated supply from the Power Supply Unit (PSU). 4. This PC Fan Control/PC Case Fan Controller hub gets powered from 12 Pin SATA cable & can connect up to 10 fans. 5. You need to take care while handling to avoid bending the pins & capacitor while installing the SATA hub. 6. It makes the operation of managing multiple fans from a single case input easier for you now. 7. You need to be careful while plugging & un-plugging your SATA fan power. Simple installation & easy configuration this Chassis Fan Hub will work even if only connected to the PSU with SATA connector. You just plug the board into the CPU fan motherboard connection & then SATA for power. It has EVA double-sided adhesive tape at the back of the hub to mount to the case or any flat place. You can fix the screw hole in the middle of the PCB to facilitate fixing to a part of the chassis. Note: The red interface is the dedicated interface for CPU fan, these black interface are conventional PWM fan interfaces. Package Include: 1x HUB 1x PWM connector