EternaBond RoofSeal White 3" x 50'

3" x 50' Roll White Priority Shipping! Not Economy! Fresh inventory! Not sitting on the shelf for months or years! ETERNABOND is the only MicroSealant in a tape form available that will stop virtually any leak or water proof any surface in minutes. Seal any rip, tear, or open seam in any surface with RoofSeal. RoofSeal is the best solution for leak repair. It is the choice of professional roof repair specialists, on virtually all roof types including EPDM, TPO, hypalon, most PVC, modified, all metals, even copper and Kynar coated metals, tile, wood, concrete, etc. RoofSeal even works great on land-fill and pond liners. Our specialized backing has proven to be UV stable, even after 19 years in full sunlight. Our MicroSealant has a built in primer which allows RoofSeal to bond with the surface it is installed on. Perfect for re-seaming all roofs, regardless of the material. RoofSeal makes a permanent water-tight seal. 1. Locate area needing repair or sealing. 2. Clean the surface. Allow it to dry completely. Recommended cleaners: EternaClean, Lacquer Thinner, Acetone, Denatured Alcohol, etc. (If rusty, scrape or sand loose rust off, then wipe off dust.) 3. Remove release liner. (See Liner Removal Tips section.) Only remove enough liner for the area you are working on. Keep adhesive side clean and dry. Apply tape to surface. 4. Apply pressure to activate bonding process. Use a steel roofer's roller for best results. The firmer the pressure or rubbing applied, the faster the bond. *NOTE: EternaBond does not stick to silicone. Please read instructions and test in small area first if you are unsure. Please contact us if you have any questions.....Thanks for looking!