ESP32-CAM Wireless WiFi Bluetooth Camera Module ESP32 Development Board with Camera Module OV2640 2MP for Arduino IoT Projects

Features: PI Flash: default 32Mbit Ultra-small 802.11b/g/n Wi-Fi BT/BLE SoC module Bluetooth: Bluetooth 4.2 BR/EDR and BLE standards Low-power dual-core 32-bit CPU for application processors Main frequency up to 240MHz, computing power up to 600 DMIPS Built-in 520 KB SRAM, external 4M PSRAM Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC Support OV2640 and OV7670 cameras, built-in flash Image Output Format: JPEG( OV2640 support only ), BMP,GRAYSCALE Support image WiFi upload Support TF card Support multiple sleep modes Embedded Lwip and FreeRTOS Support STA/AP/STA+AP working mode Support Smart Config/AirKiss one-click distribution network Support secondary development Support for serial local upgrade and remote firmware upgrade (FOTA) Note: 1.Please make sure that the input power of module should be at least 5V 2A, otherwise the image will unstable. 2.Please pull GPIO32 low when the camera is working, because ESP32 GPIO32 pin controls camera power. 3. Do not connect high and low level when IO0 is connected to the camera XCLK, please leave IO0 floating. 4.It has default firmware before leaving factory, do not provide any additional download.Please handle it carefully if you need to re-burn other firmware. Package Included: 1x ESP32-CAM Module 1x Camera Module OV2640 2MP