Electronic Cabinet Lock, RFID Locks for Cabinets Hidden DIY Lock,?with Battery??Punch-Free?for Wooden lockers, wardrobes, Drawer lockers?Letter Box Lock

Note: This lock has been set using a proximity card. Install the battery and you are ready to use. If you need to reconfigure the card, follow the instructions to configure it. [This product contains batteries] Set the card at the factory, the operation steps are as follows; ?1?: Install the battery, use a toothpick, click the factory reset button on the lock body for 3 seconds, and release it after hearing the sound of [drop]. When the sound is over, use the IC card to continuously sense the lock body twice, at this time the lock body is opened. Do not do anything at this time, wait for the lock body to close automatically. The first card sensed at this time is the management card ?2?: After the lock body is closed, use the management card to sense the lock body once, and then quickly configure the RFID card / tag, and within 5 seconds (Note: When setting other management cards, use the management card to sense the lock body. Induct the lock body once with the added IC card, and all the added cards should be completed within 5 seconds). ?3?: At this time, the configuration of adding an ID card is completed, and 13 cards can be provided continuously. ?4?: When the card is in a low voltage state, you can open the lock through the user card; if you hear 8 [Dididi] sounds again, the lock tongue will not close, and the lock is always open, reminding customers to replace the battery ?5??This product has multiple setting modes. For other setting modes, please check the manual. ?6?: Finally, if you have any problems with the use, please contact us and we will try our best to solve your troubles. Kit includes: 1xLock, 1xLatch, 2x RFID card, 3x RFID tag, 1x screw package, 1x RFID location icon, 4x battery