Electrodepot 30 Amp 6 Pole 3 Pole x 2 Normally Open Auxiliary 1NO1NC 110120VAC Coil Motor Load 32A Lighting Load 50A Contactors Bundle with DIN Rail 35 x 150 mm and 210 Screws

ABOUT CONTACTOR 30 Amp 6 Pole Normally Open Contactors (3 Pole x 2) for home or industrial uses. With applications in lighting, motor and switching. Technical Specifications: – Contactor 660V – Contactor Type IEC – Inductive Load: 32A – Resistive Load: 50A – Number of Poles 3 x 2 – Coil Volts: 120VAC – Hz 50/60 – Action: Non-reversing – Enclosure Type Open – Auxiliary Contact Form 1NC/1NO – Coil inrush 70VA, Sealed 7.5VA – 2 HP @ 1 Phase - 120V – 5 HP @ 1 Phase - 230V – 10 HP @ 3 Phase - 208V – 10 HP @ 3 Phase - 230V – 20 HP @ 3 Phase - 480V – 30 HP @ 3 Phase - 575V – Width: 2.22" (56.4 mm) – Height: 3.50" (88.9 mm) – Depth: 3.50" (88.9 mm) – Standards CE – Base or DIN 35mm mount Wiring: Solid Conductor: 25 mm2 Max torque 0.6 Nm Stranding Conductor: 16 mm2, Max torque 0.6 Nm Compliance: CSA C22.2 No. 14, EN 60947-4-1, EN 60947-5-1, IEC 947-2, IEC 60947-4-1, IEC 60947-5-1, UL 508 ABOUT DIN RAIL DIN Rails are the standard mounting support for any electromechanical component, device or equipment designed using the DIN specifications adopted by European (EN) and international (IEC) standards. The rail features slots throughout its length making it easy to attach to a panel, wall or equipment. For support of mini circuit breakers, contactors, auxiliary relays, terminal blocks, low voltage apparatuses, etc. – Width: 35mm (1.375”) – Length 150mm (6”) – Thickness 5mm (0.2”) ABOUT SCREWS Drive stainless steel truss head screws (#10, 1/2"") for immediate installation.