Operation method:
1. Place the electric can opener on the top of the can with its edge in the groove between the cutter and the drive wheel.
2. One button to start the electric can opener, after the metal gear guides the edge of the can mouth, it rotates 360° by itself and cuts the side of the can.
3. After waiting for the cutting to be completed, the can opener stops automatically.
4. Make sure the cutter returns to the starting position and then remove the electric can opener from the can, at this time the magnet on the automatic can opener will also attract the can lid.
How to open the battery back cover:
1. Turn the battery can opener to the side of the blade, with the end of the opener facing you.
2. Hold the electric can opener horizontally, place both thumbs on the back of the can opener, and slide the thumbs down firmly.
3. Open the battery cover and put in 2 AA batteries. (Pay attention to the positive and negative poles of the battery)
Notice:
1. It is recommended that you check whether the blade is exposed before using the can opener.
2. If the blade is exposed, the can opener will not work even if the battery is inserted.
3. There are two solutions to the problem of blade exposure and canister jamming:
? There is a metal iron piece on the left side of the blade and a black reverse button at the end of the can opener. Press and hold the two buttons for 15-30 seconds at the same time, and the blade can be used again after retracting.
? Insert a four-head screwdriver into the groove on the right side of the metal blade, turn to the left until the can is loose, and the can opener can be removed.
What's in the box:
1 × Electric Can Opener
1 × Electric Can Opener Manual
