Electric Can Opener Best Electric Can Opener Kitchen Can Opener Electric Restaurant Can Opener Electric CanTin Opener Automatic by Cooks Professional Chefs Best Choice

Time to get rid of that old tin opener  Battery Instruction To install (and remove) 2 AA batteries into (from) the battery compartment (according to the polarity (+/-) instruction), slide back the bottom cover by holding the unit with the bottom facing up and the narrow end toward you. Place each thumb on each side of the magnet and pull toward you. The battery cover will snap off for easy removal. Replace the bottom cover after the batteries have been installed. Always replace both batteries at once and never mix old and new batteries or batteries of different types. Using the Electric Can Opener 1.To assure that the cutter is in the proper position, press and hold the reset button until the motor stops 2.Place the Electric Can Opener on top of the can with the rim of the can positioned in the groove of the cutter at the bottom of the Electric Can Opener 3.With the can on a flat surface, press the Start Button firmly for about one second and release it once the Electric Can Opener starts to cut the can. The Electric Can Opener will stop automatically, which means the can has been opened.When the cutting has been completed, lift the Electric Can Opener off the can. For your convenience, a magnet in the centre of the Electric Can Opener will pick up the lid as well. TIPS? The cutter will not operate when the bottom cover is removed from the unit.              If the cutter is in the correct position, the motor will not start when the reset button is pressed .             The cutter will not operate unless it is positioned correctly on the rim of the can.             The cut edge of the can should be treated with care even smooth because the edge is thin enough to cause harm.