EG STARTS Arcade Buttons 30mm 12V LED lit Arcade Push Button Switch Compatible Arcade Joystick Mame Jamma Kit Part -White-

This listing is for 10 x New full color Illuminated Arcade Button With 12V LED Give your arcade project the wow factor with this translucent, illuminated arcade button. Each button comes complete with a fixing ring, bulb holder, spacer, microswitch and 5V LED. If you decide to illuminate the LED supplied with this arcade button, you will need a 12V power supply. This can be taken from a spare molex connector (yellow wire) on a PC power supply or a Jamma PSU. This button will mount in a 24mm to 28mm hole. What's included with this button? 10 x LED Illuminated Push Button 10 x Fixing ring 10 x 12V LED Lamp (We will add two lamp as a gift) 10 x Bulb holder 10 x Microswitch (We will add one Microswitch as a gift) Product Dimensions: * Mounting hole required: 24mm - 28mm * Overall diameter of button across plunger: 32mm * Maximum depth of button from top of plunger to bottom of microswitch: 65mm Wiring Information: These buttons require 4.8mm crimped wires for connection. 1 wire for ground connection (CO) and 1 wire for signal connection (NO). These buttons require 6.3mm crimped wires for illuminating. 1 wire for the positive connection and 1 wire for the negative connection (if the LED does not work. Please exchange LED lights interface. ) We will send 10 Buttons with your Choose to you! Need more products. Please visit the store: https://www.amazon.com/s?marketplaceID=ATVPDKIKX0DER&me=A3H7VB6FZ4M9FM&merchant=A3H7VB6FZ4M9FM&redirect=true