Steps for Usage
**Glueless Patch**
1. Remove the tire from the rim with the tire lever. Please exhaust the air in the tire in advance.
2. Inflate the tube and look for holes or listen for leaks. Put it under water to look for bubbles and mark puncture holes. Slightly scuff area to be patched with metal rasp and sandpaper to make it rough.(this is easy to remove the attached debris and allow the Rubber Cement to penetrate)
3. Clean the polished part with some tools, ensuring the polished part has no dust, dirt and water.
4. Place the patch at the center of the hole and press it firmly from the center to the outside, ensuring the patch has no bubbles or wrinkles.
5. After a few minute, fill the bike tire with air.
