ECCPP provides many types of auto parts and accessories for our customers with the highest quality products and passionate customer services.
Each product design is precision-engineered to strict tolerances based on a clear understanding of the original equipment part, original vehicle design and performance requirements. Using high standards components that each design is extensively tested for durability and performance. We stand behind every product we sell. If you are not satisfied with our product please contact us.
Fitment
2004 2005 2006 Mazda 3
2003 2004 2005 Mazda 6
Please use the compatibility chart drop down menu above to double check if these will work for your car.
You must have a factory installed keyless entry system for these to work. Your existing key must look the same and have the same button configuration for this to work properly.
Package Including
1 Keyless Remote Fob Replacement
..................Mazda 3/6 Keyless Entry Remote Fob Smart Key Programming Instructions..................
1. Close all doors, open drivers door, key out of ignition.
2. Lock and Unlock the drivers door using the power lock switch on door panel.
3. Insert key into the ignition.
4. Turn key to the ON and OFF position 3 times in 10 seconds. Leave key in ignition.
5. Close and open drivers door 3 times ending with door in the open position.
6. Door locks should respond by locking and unlocking.
7. Press any button on remote 2 times. Doors should then lock and unlock.
8. If programming a second remote press any button on it 2 times and door locks should lock and unlock.
9. Remove key from ignition and locks should lock and unlock again.
10. Test Remotes.
Each product design is precision-engineered to strict tolerances based on a clear understanding of the original equipment part, original vehicle design and performance requirements. Using high standards components that each design is extensively tested for durability and performance. We stand behind every product we sell. If you are not satisfied with our product please contact us.
Fitment
2004 2005 2006 Mazda 3
2003 2004 2005 Mazda 6
Please use the compatibility chart drop down menu above to double check if these will work for your car.
You must have a factory installed keyless entry system for these to work. Your existing key must look the same and have the same button configuration for this to work properly.
Package Including
1 Keyless Remote Fob Replacement
..................Mazda 3/6 Keyless Entry Remote Fob Smart Key Programming Instructions..................
1. Close all doors, open drivers door, key out of ignition.
2. Lock and Unlock the drivers door using the power lock switch on door panel.
3. Insert key into the ignition.
4. Turn key to the ON and OFF position 3 times in 10 seconds. Leave key in ignition.
5. Close and open drivers door 3 times ending with door in the open position.
6. Door locks should respond by locking and unlocking.
7. Press any button on remote 2 times. Doors should then lock and unlock.
8. If programming a second remote press any button on it 2 times and door locks should lock and unlock.
9. Remove key from ignition and locks should lock and unlock again.
10. Test Remotes.
