OEM Part Number(s):MF21141N, AF10207, 74-10054, 7410053, 336-60580
FITMENT?
2001-2005 KIA RIO
PACKAGE:
1 × Air Flow Sensor
Installing The Replacement Mass Air Flow Sensor
1. Position MAF sensor in the vehicle. Make sure the airflow direction indicated on the sensor is toward the engine.
2. Install sensor-to-air-duct seal(s), if so equipped, on the replacement MAF sensor.
3. Connect the MAF sensor to the throttle body air cleaner ducts. If the sensor mounts directly on the throttle body, install and tighten the mounting screws to 10 ft-lb. DO NOT OVERTIGHTEN!
4. Position clamps over the air duct/MAF sensor connections and tighten. Replace the clamps if necessary.
NOTE: For the MAF sensor to work properly, the sensor/air duct connections must be airtight.
5. CAREFULLY plug the harness connector lead into the MAF sensor.
FITMENT?
2001-2005 KIA RIO
PACKAGE:
1 × Air Flow Sensor
Installing The Replacement Mass Air Flow Sensor
1. Position MAF sensor in the vehicle. Make sure the airflow direction indicated on the sensor is toward the engine.
2. Install sensor-to-air-duct seal(s), if so equipped, on the replacement MAF sensor.
3. Connect the MAF sensor to the throttle body air cleaner ducts. If the sensor mounts directly on the throttle body, install and tighten the mounting screws to 10 ft-lb. DO NOT OVERTIGHTEN!
4. Position clamps over the air duct/MAF sensor connections and tighten. Replace the clamps if necessary.
NOTE: For the MAF sensor to work properly, the sensor/air duct connections must be airtight.
5. CAREFULLY plug the harness connector lead into the MAF sensor.
