OEM Part Number(s): 222040H010, 222040T010, 2220431010
FITMENT?
2007-2012LEXUSES350
2007-2011LEXUSGS350
2008-2014LEXUSIS F
2006-2013LEXUSIS250
2006-2013LEXUSIS350
2007-2009LEXUSRX350
2007-2010SCIONTC
2008-2014SCIONXB
2008-2013SCIONXD
2005-2012TOYOTAAVALON
2007-2011TOYOTACAMRY
2009-2010TOYOTACOROLLA
2008-2013TOYOTAHIGHLANDER
2009-2013TOYOTAMATRIX
2006-2012TOYOTARAV4
2007-2010TOYOTASIENNA
2009-2014TOYOTAVENZA
PACKAGE:
1 × Air Flow Sensor
Installing The Replacement Mass Air Flow Sensor
1. Position MAF sensor in the vehicle. Make sure the airflow direction indicated on the sensor is toward the engine.
2. Install sensor-to-air-duct seal(s), if so equipped, on the replacement MAF sensor.
3. Connect the MAF sensor to the throttle body air cleaner ducts. If the sensor mounts directly on the throttle body, install and tighten the mounting screws to 10 ft-lb. DO NOT OVERTIGHTEN!
4. Position clamps over the air duct/MAF sensor connections and tighten. Replace the clamps if necessary.
NOTE: For the MAF sensor to work properly, the sensor/air duct connections must be airtight.
5. CAREFULLY plug the harness connector lead into the MAF sensor.
FITMENT?
2007-2012LEXUSES350
2007-2011LEXUSGS350
2008-2014LEXUSIS F
2006-2013LEXUSIS250
2006-2013LEXUSIS350
2007-2009LEXUSRX350
2007-2010SCIONTC
2008-2014SCIONXB
2008-2013SCIONXD
2005-2012TOYOTAAVALON
2007-2011TOYOTACAMRY
2009-2010TOYOTACOROLLA
2008-2013TOYOTAHIGHLANDER
2009-2013TOYOTAMATRIX
2006-2012TOYOTARAV4
2007-2010TOYOTASIENNA
2009-2014TOYOTAVENZA
PACKAGE:
1 × Air Flow Sensor
Installing The Replacement Mass Air Flow Sensor
1. Position MAF sensor in the vehicle. Make sure the airflow direction indicated on the sensor is toward the engine.
2. Install sensor-to-air-duct seal(s), if so equipped, on the replacement MAF sensor.
3. Connect the MAF sensor to the throttle body air cleaner ducts. If the sensor mounts directly on the throttle body, install and tighten the mounting screws to 10 ft-lb. DO NOT OVERTIGHTEN!
4. Position clamps over the air duct/MAF sensor connections and tighten. Replace the clamps if necessary.
NOTE: For the MAF sensor to work properly, the sensor/air duct connections must be airtight.
5. CAREFULLY plug the harness connector lead into the MAF sensor.