EATOP HTV Heat Transfer Vinyl Rolls 12 Inches x 10 Feet Iron On Vinyl for DIY T-Shirts Works Perfect with Cricut and Silhouette -Yellow-

EATOP black iron on vinyl are 100% Polyurethane and is SGS certified,offers the perfect easy to cut&weed result a breeze. It's also extremely durable after wash and uses a lower pressure and setting for application,Gives all your projects a finished and professional look. Craft Cutter Setting:   Cricut:   Blade: Standard; Setting: Iron-On Silhouette Cameo:   Blade: 3; Speed: 8;Force: 4 ;Passes: 2; Material: Smooth Brother:   Blade: 1; Cut Speed: 1;Cut Pressure: 1 *Settings may vary based on blade condition and age of machine.  Home Iron: -Please Heat the iron on medium setting (302°F– 320°F); -Press each section of the design with medium/firm pressure for 10-15 seconds; Heat Press: -Preheat garment for 2-3 seconds; -Apply design at 305?; -Use medium pressure for 10-15 seconds; Warm Tips: 1.Make sure there are no wrinkles on the fabric material.  2.If you are having trouble, try turning the shirt 90 degrees and pressing again, this should eliminate problems from cold spots.  3.If you've already ruined one shirt, keep using it to experiment. Cut small pieces of heat transfer and try raising or lowering your temperature, or pressing longer or for less time.   4. Please wait for at least 24 hours to wash your design. If you have any question for our cricut vinyl rolls can send us an inquiry or email directly,our email is eatophtv@outlook.com,We will reply your message asap in 12 hours.